Mailer 11

Fixture Introduction

ST. CLAIRE GRANDIOSA

The solid brass base of the St. Claire Grandiosa makes for a sturdy build and elegant contrast to it's copper top. The underside of the top is powder-coated white for a bright reflection of light. The St. Claire Grandiosa is scaled for large pillars, walls, and driveway entrances.

View St. Claire Grandiosa Flyer

View St. Claire Grandiosa Detail Line Drawing

View St. Claire Grandiosa Photo

Something To Live By

Always laugh when you can.
It is cheap medicine.

Lord Byron

H30 Powercenter^(TM) Design Criteria: Amperage Draw, Dimensions, Weight

Take special care to maintain lighting systems powered by H30 multi-voltage output Powercenters^(TM).

The H30 system can deliver in excess of 12 volts. However, it is important to design the system so that the voltage at any low voltage lamp does not exceed 12 volts.

No more than 10% of the lamps on a single run should remain inoperable at any given time. If burned out lamps are left unattended, additional lamp failure is inevitable.

Detailed notations should be made on design plans to mark the different voltage runs in case future modifications or additions are needed. This will help prevent employing high voltage output when it is not necessary.

Reduces 120V to 11V - 14V 60 cycles A.C. Multi-tap secondary winding.
Grounded and shielded (ground shield between primary and secondary). 2490V Dielectric.
Amper-proof fustat(s) on 12V side.
Multi-tap primary winding.

H30-250-SS

2.09 = Amperage Draw on 120V side
13" Tall, 7" Wide, 5" Deep
16 pounds
Detail Drawing

H30-500-SS

4.16 = Amperage Draw on 120V side
16.75" Tall, 9.63" Wide, 5.5" Deep
28.2 pounds
Detail Drawing

H30-1000-SS

8.33 = Amperage Draw on 120V side
16.75" Tall, 9.63" Wide, 5.5" Deep
42.4 pounds
Detail Drawing

T- Series Powercenters^(TM): Amperage Draw, Dimensions, Weight

T-100-SS

.833 = Amperage Draw on 120V side
13" Tall, 7" Wide, 5" Deep
12.6 pounds
Detail Drawing

T-150-SS

1.25 = Amperage Draw on 120V side
13" Tall, 7" Wide, 5" Deep
12.8 pounds
Detail Drawing

T-250-SS

2.09 = Amperage Draw on 120V side
13" Tall, 7" Wide, 5" Deep
16.1 pounds
Detail Drawing

T-500-SS

4.16 = Amperage Draw on 120V side
16.75" Tall, 9.63" Wide, 5.5" Deep
27.6 pounds
Detail Drawing

T-1000-SS

8.33 = Amperage Draw on 120V side
16.75" Tall, 9.63" Wide, 5.5" Deep
27.6 pounds
Detail Drawing

Newsletter Pdf

(Easy to print and save)