Nightscaping - Flipper

	print page

Flipper
		UW-0304

Use the Nightscaping® Flipper in either wet or dry locations. Originally designed for general underwater applications, the Flipper offers you several additional lighting possibilities. Try it in a Japanese lantern, at the base of decorative grasses and specimen plant materials, under a foot bridge or beneath a bench in an outdoor sitting area. The Flipper's multiple capabilities are sure to benefit your lighting designs.

Standard Lamp:	UW-0304-C -LO921 (Standard)
Material:	Body/Base: Non-corroding high-impact black Noryl™ Power Cord: 18/3 SOOW Water Resistant (10' Standard)
Finish:	Black Noryl™
Lens:	Clear Polycarbonate Lens UW-0304 -C (Standard)
Socket:	Non-corroding Noryl™ (Wedge Base)
Mounting:	Surface Mount (Standard) - Ballast weight allows fixture to sit on any flat surface

Max Wattage:

UL: LO921(Standard) 16.5w

Lamp

Base

A.C. Volts

A.C. Watts

Candle Power

Beam
Spread

Comparable
120V Lamp

Average Life Hours

PM
Chart

LO921

T-5 wedge

11.8

16.5

15.75

60W

2,000

Socket Part #:

0344 (WEDGEBASE W/TAB)

Lead Wire Lengths:	N.A.

Other Features:

Alternative Lamps:

Part # UW-0304-C-

Lamps	A.C. Watts Comsumed
Lamps	UL	CSA
LO161	1.6
LO194	2.4
LO194A*	2.4
LO658*	.6
LO904	7.5
LO906	8.0
LO912 (Optional)	11.8
LOX1430*
LOX1433*
* = Surcharge

Lens:	UW-0304 -A, -B, -G, -R, -S
Mounting Options:	Cord: UW-0304-C-LO921 -__FT Additional cord available, up to 50' per fixture. 10' Standard Socket: UW-0304-C -BP Flipper with a Bi-Pin GY4 Socket (No lamp) Weight: UW-0304-C-LO921 -NW Flipper without lead weight
Options:	Lens: NS-FP-C (Standard/Accessory) Clear Lens NS-FP-A, -B, -G, -R Colored Lens Mount: MT-0304 Stainless Steel - Single Flipper Mount Bracket: MT-0304-VLS Stainless Steel - Single Flipper Mount Bracket Vertical Light Shield
Accessories:	Lens: NS-DO-C (Standard/Accessory) Clear Lens NS-DO-A, -B, -G, -R Colored Lens Mount Stand: Adjustable Swivel Mount allows 90° adjustment. Height of 8 ½" at 90° DO-0305SS Stainless Steel DO-0305BR Brass

Photometrics

Design Tip:
Place in ornamental grasses or plant materials or mount on the underside of bridges and docks.

Note:
Splice must always be made out and above water level. Do not use in swimming pools, spas, or other water features that can come into direct contact with people!