Home page Site map and search Photos of projects Contact us Need find a Dealer

 



Contact us:
 

E-mail us

  Call us toll free within the U.S. 1-800-544-4840
   



Wire Connectors:


12-2Y

Pair of Scotch Locks used for connecting #12 or #18 stranded wires.  Not recommended for direct burial in ground.

12-DB

Same as above, but for weatherproof direct burial.  Includes epoxy packet.  No solder or tape required.

Click here to learn about Ace Connnector

Ace Connection Info

1515-DB ACE "DB" (Direct Burial) Connectors - Individual Pair
1515-30DB ACE "DB" (Direct Burial) Connectors - Box of Thirty

1525-DB

ACE "DB" (Direct Burial) Connectors - Individual Pair

1525-10DB

ACE "DB" (Direct Burial) Connectors - Box of Ten

1525-25DB

ACE "DB" (Direct Burial) Connectors - Bulk Pack of 25

1321

1525-DB ACE Connector Shrink Tubing - 6 Pack

1538-DB

DUAL ACE "DB" (Direct Burial) Connectors - Individual Pair

1538-15DB

DUAL ACE "DB" (Direct Burial) Connectors - Bulk Pack of 15

1325

1538-DB DUAL ACE Connector Shrink Tubing - 4 Pack


12-Volt Adapters: All versions - No voltage change!  Transformer MUST be used!

76-C-SCB

Converts 110V Candelabra socket to 12V Single-Contact Bayonet socket.

77-I-SCB

Converts 110V Intermediate socket to 12V Single-Contact Bayonet socket.

78-M-SCB

Converts 110V Medium socket to 12V Single-Contact Bayonet socket.

78-MR-SCB

Converts 110V Medium socket to 12V Bi-Pin socket.

79-MR-SCB

Converts 110V Medium socket to 12V MR-16 socket.


12-Volt Conversion Kit: All versions - No voltage change!  Transformer MUST be used!

CK-912

Includes connectors, socket, cable, lamp (LO912), and epoxy. Converts unlit objects such as stone lanterns, fishing balls, etc., into 12V fixture with wedge base socket or changes existing 110V/240V fixture into 12V if space permits.

CK-93

Includes connectors, socket, cable, lamp (LO93), and epoxy. Converts unlit objects such as stone lanterns, fishing balls, etc., into 12V fixture with single-contact bayonet socket or changes existing 110V/240V fixture into 12V if space permits.


Banana Plugs:

BB-01F

Female quick connector used on the demo cable in DEMO-99.

BB-01M

Male quick connector used on the demo cable in DEMO-99.


Thermal Switch Protector:

78-40

Thermal Switch Temperature Protector makes already safe operating Nightscaping® well lights even safer by further insuring these fixtures operate within a safe temperature range.


Inline Fuse Protector:

ILF-5A

Inline Fuse Protector with a 5Amp Fuse.  Required for safe operation of fixtures with #18 lead wire exceeding standard length.


Mini-Torch:

TO-0403

Mini-Torch - Propane torch used to heat and seal ACE Connectors.

0403

Bottle of Propane refill for Mini-Torch.


Socket Saver:

0808-C

Socket Saver - Petroleum-based moisture inhibitor for 12V sockets.


 

 
 

Copyright © 2003-2008 Nightscaping®. All Rights Reserved.
Nightscaping® reserves the right to modify the design and/or construction of the fixture shown.