Home page Site map and search Photos of projects Contact us Need find a Dealer

 



Contact us:
 

E-mail us

  Call us toll free within the U.S. 1-800-544-4840
   

Standard Lamp: 300W - 120V Incandescent (Standard)
Material: Bell: Cast Aluminum
Stem: Galvanized Conduit
Standard Finishes: EL-3000 -1, -7 (Standard)
Other Finishes: EL-3000 -2, -3, -4, -8, -9, -AV, -VP, -W (Optional w/surcharge)
Mounting: 1 ½" Pipe Hook (Included) has male pipe threads on the bottom end. Nightscaping® suggests that the hook be installed on a 3" rigid pipe with an adapter to meet local codes and conditions. Mount so that the bottom of the finished reflector bell is 10'-6" above the ground.
Socket Part #: N.A.
Lead Wire Lengths: N.A.

Design Tips:
El Caminos are available with spike or conduit mounts.



This will take you back one page
  Click here if you need help

El Camino   Click here for information on Specialty Lighting.
 
You will need a transformer in order to run your system. Press here to find one.
Part Number
EL-3000
You will need to find a register contractor in order to buy this fixture. Press here to find one.
     
Click to enlarge
Click here for the history of the El Camino.
Have Nightscaping® custom design an El Camino for your special projects. The El Camino, when installed to exact specifications, stands over 13 feet tall and based on your specifications can have either line voltage light sources or low voltage light sources factory installed. The solid cast aluminum bell is over 18" in diameter at its widest point and can be custom cast with the owner's name, initials, estate name or any other message desired. Try using it as an entry marker or light source for large commercial applications.
Not available yet

 

 

 

 

 

 

 

 

 

 

 
 

Copyright © 2003-2008 Nightscaping®. All Rights Reserved.
Nightscaping® reserves the right to modify the design and/or construction of the fixture shown.