Additional Control Modules

T-10-02SSA: Analog Time Switch

Control a circuit requiring 24 hour, 7 day scheduling with the rain tight SS Series Analog Time Switch by Nightscaping®.

Dimensions: 6 3/4" x 3 3/4" x 4 ½"

Mounting Instructions:
Mount the T-10-02SSA Analog Time Switch a minimum of 36" above ground in a location that allows clearance to open and remove switch cover. The case features a bracket with two keyhole slots 2 ½" on center for easy installation.

Time Switch Rating:
12.5AMP 120VAC resistive, 1350 Watt Tungsten, 1 HP @ 120VAC. Power consumption equals approximately 1VA.

T-10-02SSA/PC - Built-in photocell.

Analog Timer Programming Instructions (PDF)

ETC-300SS: Digital Time Switch

Control a circuit requiring 24 hour, 7 day scheduling with the rain tight SS Series Digital Time Switch by Nightscaping®. Program individual days of the week or block programs based on the demands of any individual lighting system.

Dimensions: 6 3/4" x 3 3/4" x 4 ½"

Mounting Instructions:
Mount the ETC-300SS Digital Time Switch a minimum of 36" above ground in a location that allows clearance to open and remove switch cover. The case features a bracket with two keyhole slots 2 ½" on center for easy installation.

Time Switch Rating:
12.5AMP 120VAC resistive, 1350 Watt Tungsten, 1 HP @ 120VAC. Power consumption equals approximately 1VA.

Running Reserve:
In case of power failure, the running reserve feature will maintain the time of day and program for approximately 100 hours.

ETC-300SS/PC - Built-in photocell.

Digital Timer Simple Programming Instructions (PDF)

Digital Control Switch (Control Pro)

The new Nightscaping® Power Switch is the simplest, most reliable lighting controller available. It fits perfectly in the transformer module compartment just like the other Nightscaping® control modules, so on-site upgrades to your current systems are a snap.

The Digital Power Switch operates from a solar calendar specific to your local area. It is pre-programmed to turn the lights on at sunset and off at sunrise. It can also be set for on/off times of your choice. Two daily on/off cycles are possible. The sunset to sunrise feature eliminates the need for a photocell, allowing the transformer to be mounted anywhere, even in a dark location, yet you still have the control flexibility that a photocell would provide. Because it operates from a solar calendar, sunset is pre-determined for each day and adjusts itself for season and daylight savings time. You can set it once and leave it alone.

Digital Control Switch Instructions (PDF)