| Wire Connectors: | ||
 |
12-2Y |
Pair of Scotch Locks used for connecting #12 or #18 stranded wires. Not recommended for direct burial in ground. |
12-DB |
Same as above, but for weatherproof direct burial. Includes epoxy packet. No solder or tape required. |
|
|
1515-DB | ACE "DB" (Direct Burial) Connectors - Individual Pair |
| 1515-30DB | ACE "DB" (Direct Burial) Connectors - Box of Thirty | |
1525-DB |
ACE "DB" (Direct Burial) Connectors - Individual Pair |
|
1525-10DB |
ACE "DB" (Direct Burial) Connectors - Box of Ten |
|
1525-25DB |
ACE "DB" (Direct Burial) Connectors - Bulk Pack of 25 |
|
1321 |
1525-DB ACE Connector Shrink Tubing - 6 Pack |
|
1538-DB |
DUAL ACE "DB" (Direct Burial) Connectors - Individual Pair |
|
1538-15DB |
DUAL ACE "DB" (Direct Burial) Connectors - Bulk Pack of 15 |
|
1325 |
1538-DB DUAL ACE Connector Shrink Tubing - 4 Pack |
|
| 12-Volt Adapters: All versions - No voltage change! Transformer MUST be used! | ||
 |
76-C-SCB |
Converts 110V Candelabra socket to 12V Single-Contact Bayonet socket. |
77-I-SCB |
Converts 110V Intermediate socket to 12V Single-Contact Bayonet socket. |
|
78-M-SCB |
Converts 110V Medium socket to 12V Single-Contact Bayonet socket. |
|
78-MR-SCB |
Converts 110V Medium socket to 12V Bi-Pin socket. |
|
79-MR-SCB |
Converts 110V Medium socket to 12V MR-16 socket. |
|
| 12-Volt Conversion Kit: All versions - No voltage change! Transformer MUST be used! | ||
 |
CK-912 |
Includes connectors, socket, cable, lamp (LO912), and epoxy. Converts unlit objects such as stone lanterns, fishing balls, etc., into 12V fixture with wedge base socket or changes existing 110V/240V fixture into 12V if space permits. |
CK-93 |
Includes connectors, socket, cable, lamp (LO93), and epoxy. Converts unlit objects such as stone lanterns, fishing balls, etc., into 12V fixture with single-contact bayonet socket or changes existing 110V/240V fixture into 12V if space permits. |
|
| Banana Plugs: | ||
 |
BB-01F |
Female quick connector used on the demo cable in DEMO-99. |
BB-01M |
Male quick connector used on the demo cable in DEMO-99. |
|
| Thermal Switch Protector: | ||
|
78-40 |
Thermal Switch Temperature Protector makes already safe operating Nightscaping® well lights even safer by further insuring these fixtures operate within a safe temperature range. |
| Inline Fuse Protector: | ||
|
ILF-5A |
Inline Fuse Protector with a 5Amp Fuse. Required for safe operation of fixtures with #18 lead wire exceeding standard length. |
| Mini-Torch: | ||
 |
TO-0403 |
Mini-Torch - Propane torch used to heat and seal ACE Connectors. |
0403 |
Bottle of Propane refill for Mini-Torch. |
|
| Socket Saver: | ||
|
0808-C |
Socket Saver - Petroleum-based moisture inhibitor for 12V sockets. |
